lldp:Inst

Link Layer Discovery Protocol (LLDP) supports a set of attributes that it uses to discover neighbor devices. These attributes contain type, length, and value descriptions and are referred to as TLVs. LLDP supported devices can use TLVs to receive and send information to their neighbors. Details such as configuration information, device capabilities, and device identity can be advertised using this protocol.

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt nw:AdminSt
(scalar:Enum8)		 The administrative state of the object or policy. SELECTION:
1 - enabled
2 - disabled
DEFAULT: enabled
advertiseSystemChassisIdEnable lldp:AdminSt
(scalar:Enum8)		 LLDP chassis-id switch configuration SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
ctrl nw:InstCtrl
(scalar:Bitmask64)		 The control state. SELECTION:
1 - stateful-ha
holdTime lldp:HoldTime
(scalar:Uint16)		 The hold time (in seconds) that a receiving device should hold the information sent by your device before discarding it.
RANGE: [1 , 255]
DEFAULT: 120
infraVlan lldp:InfraVlan
(scalar:Uint16)		 Specifies the Infra VLAN SELECTION:
0 - unspecified
DEFAULT: unspecified
initDelayTime lldp:InitDelayTime
(scalar:Uint16)		 The delay time (in seconds) for LLDP to initialize on any interface.
RANGE: [1 , 10]
DEFAULT: 2
multiPeerEnable lldp:AdminSt
(scalar:Enum8)		 LLDP multi-neighbor configuration SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
optTlvSel lldp:OptTlvSel
(scalar:Bitmask16)		 The selectors for optional TLVs according to the LLDP protocol (802.1AB) specifications. SELECTION:
0 - unknown
1 - port-desc
2 - sys-name
4 - sys-desc
8 - sys-cap
16 - mgmt-addr-v4
32 - port-vlan
64 - dcbx
64 - mgmt-addr-v6
128 - dcbxp
256 - power-mgmt
512 - four-wire-pwr-mgmt
1024 - dcbxp egress-queuing
2048 - max-framesize
4096 - vlan-name
8192 - link-aggregation
DEFAULT: port-desc,sys-name,sys-desc,sys-cap,mgmt-addr-v4,mgmt-addr-v6,port-vlan,dcbxp,power-mgmt,four-wire-pwr-mgmt,max-framesize,vlan-name,link-aggregation
optTlvSelHidden lldp:OptTlvSel
(scalar:Bitmask16)		 Optional TLV Selector SELECTION:
0 - unknown
1 - port-desc
2 - sys-name
4 - sys-desc
8 - sys-cap
16 - mgmt-addr-v4
32 - port-vlan
64 - dcbx
64 - mgmt-addr-v6
128 - dcbxp
256 - power-mgmt
512 - four-wire-pwr-mgmt
1024 - dcbxp egress-queuing
2048 - max-framesize
4096 - vlan-name
8192 - link-aggregation
DEFAULT: unknown
pcEnable lldp:AdminSt
(scalar:Enum8)		 LLDP enabled on PortChannel SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
portIdSubType lldp:PortIdSubType
(scalar:Enum8)		 PortId SubType SELECTION:
0 - long
1 - short
DEFAULT: long
sysDesc naming:Descr
(string:Basic)		 System description.
MAX SIZE: 128
txFreq lldp:TxFreq
(scalar:Uint16)		 The transmission frequency of LLDP updates (in seconds).
RANGE: [1 , 254]
DEFAULT: 30
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
operErr nw:OperErrQual
(scalar:Bitmask64)		 Operational Errors Qualifier SELECTION:
1 - init-err
2 - mem-err
4 - ipc-err
8 - int-err
16 - sock-err
32 - proto-err
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
name naming:Name256
(string:Basic)		 The name of the object.
MAX SIZE: 128
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced